OPA2192IDR amplifier

OPA2192IDR amplifier

OPA2192IDR amplifier

5 of 5

Summery

OPA2192IDR is a high quality amplifier. Submit an inquiry to buy this original texas instruments amplifier directly from China, with no intermediary at the cheapest price and valid warranty.

CategoryAmplifier
BrandTexas Instruments
Datasheet DataSheet

Quantity

+
-

OPA2192IDR Amplifier Introduction

OPA2192IDR is a high quality op-amp Amplifier. Amplifiers are valuable parts that easily eliminate the deficiencies in electronic devices. With the correct use of this part, the accuracy of the machine can be significantly increased.

OPA2192IDR is a two-channel amplifier and is used in low-thrust devices. That is, the part will reduce the amount of noise by being placed in the device and will strengthen some valuable parameters. In addition, it has acceptable technical specifications and reasonable price.

OPA2192IDR Amplifier Advantages

Due to the two-channel capability, OPA2192IDR Amplifier can be used to reduce noise or enhance two parameters in the device. There are 8 bent pins on the part that can be easily installed on printed circuit boards. Of course, for installation, careful soldering must be done on the bases of the product.

The main gain of the amplifier has a bandwidth of 10 MHz, which is quite a good figure considering the price range of the product. Also, the common mode rejection rate is about 120 decibels, which shows the proper performance of the part. It goes without saying that the OPA2192IDR op-amp amplifier has a THD rate of about 0.0008%. This means that the piece will not have significant noise or distortion.

OPA2192IDR Start Up

To start OPA2192IDR amplifier, you need a power supply with a voltage between 4.5 and 36 volts. The internal current of the part during operation will be 1 milliamperes. Developers can also receive 65.5 mA current in the output pins. Please note that the product is highly sensitive to humidity and should be used in the appropriate temperature range (-40 to +125 degrees Celsius).

Buy OPA2192IDR Online From China

To wholesale OPA2192IDR with no chain of intermediaries, from the manufacturer company or trusty sources in China or all around the world, add this part and your other required electronic components to the inquiry basket and submit the inquiry list after you have added and confirmed all of your required parts. We will send you back an invoice with unbeatable prices as soon as possible.

OPA2192IDR amplifier Attributes

  • Number of Channels 2 Channel
  • GBP - Gain Bandwidth Product 10 MHz
  • SR - Slew Rate 20 V/us
  • CMRR - Common Mode Rejection Ratio 120 dB
  • Output Current per Channel 65 mA
  • Ib - Input Bias Current 5 nA
  • Vos - Input Offset Voltage 5 uV
  • en - Input Voltage Noise Density 5.5 nV/sqrt Hz
  • Supply Voltage - Max 36 v
  • Supply Voltage - Min 4.5 v
  • Operating Supply Current 1 mA
  • Minimum Operating Temperature -40 c
  • Maximum Operating Temperature +125 c
  • Mounting Style SMD/SMT
  • Package/Case SOIC-8
  • Packaging Reel
  • Packaging Cut Tape
  • Packaging MouseReel
  • Amplifier Type Low Drift Amplifier
  • Brand Texas Instruments
  • Features EMI Hardened, High Cload Drive
  • In - Input Noise Current Density 1.5 fA/sqrt Hz
  • Input Type Rail-to-Rail
  • Ios - Input Offset Current 2 pA
  • Factory Pack Quantity 2500
  • THD plus Noise 0.00008 %
  • Voltage Gain dB 140 dB
  • Unit Weight 76 mg

Customer Reviews

Of5
Share your thoughts with other customers

Write Your Review

this field id required
this field id required
this field id required
this field id required

Need OPA2192IDR amplifier Supplier in China?

Cooperation with China manufacturers has made YouGou Electronics one of the best Amplifier suppliers in China. If you need to buy OPA2192IDR amplifier from main manufacturers at the wholesale price, submit the form bellow.

this field id required
this field id required