EXC-CET103U emi filter

EXC-CET103U emi filter

EXC-CET103U emi filter

5 of 5

Summery

EXC-CET103U is a high quality emi filter. Submit an inquiry to buy this emi filter directly from China, with no intermediary at the cheapest price and valid warranty.

CategoryEMI Filter
BrandCHINA-MARKET
Datasheet DataSheet

Quantity

+
-

EXCCET103U Introduction

EXCCET103U is an EMI filter used to reduce the noise in the circuits. EMI filters are among the valuable parts in the electronics world that can give developers valuable points. By using this piece in the input path of the power supply to other parts of the board, the amount of noise or fluctuations will be significantly reduced.

Panasonic has produced this product in order to make a flawless electronic filter available to developers. Also, due to the high manufacturing quality, the part performs well and reduces the noise on the board in the best way. It goes without saying that there is no need to pay a special fee to buy the part, and with a little technical knowledge, it can be installed on the board path.

Advantages and characteristics of EXCCET103U

Since the component is one of the SMD/SMT filters, it does not occupy much space on the board. EXCCET103U is only 1.8 mm wide and its length is only 4.5 mm. Also, due to the 2.7 mm thickness of the part, the thickness of the board will not increase significantly with the installation of the filter. Of course, the filter's weight of 0.03 ounce is not a significant number, and developers do not need to worry about the weight of the device board.

The capacitance of the EXCCET103U EMI filter capacitor is about 0.1 uF, which meets the needs of developers to reduce noise well. Also, the frequency range of the filter is set between 15 and 120 MHz so that most fluctuations can be resolved.

Note that the voltage and current rating of the filter is 50 volts and 2 amps, respectively. For this reason, if the part is installed on paths with more than the mentioned values, the filter will be damaged. The internal resistance of the filter is zero in the milliohm scale with standard environmental conditions (temperature -25 to +85 degrees Celsius). That's why you don't need to worry about changing the potential difference and current of your board.

EXC-CET103U emi filter Attributes

  • Capacitance 0.01 uF
  • Voltage Rating 50 v
  • Current Rating 2 A
  • Termination Style SMD/SMT
  • Minimum Operating Temperature - 25 c
  • Maximum Operating Temperature + 85 c
  • Attenuation 25 dB
  • Frequency Range 15 to 120 MHz
  • Height 2.7 mm
  • Length 4.5 mm
  • Factory Pack Quantity 1000
  • Width 1.8 mm
  • Unit Weight 1 g

Customer Reviews

Of5
Share your thoughts with other customers

Write Your Review

this field id required
this field id required
this field id required
this field id required

Need EXC-CET103U emi filter Supplier in China?

Cooperation with China manufacturers has made YouGou Electronics one of the best EMI Filter suppliers in China. If you need to buy EXC-CET103U emi filter from main manufacturers at the wholesale price, submit the form bellow.

this field id required
this field id required