Toshiba TLP350 optocoupler is an electronic component that helps electronic board designers to have better control over the signals or switch signals on inputs and outputs. It can also be used to make other devices such as computer interfaces and even voltage controllers for direct and alternating circuits.
This optocoupler, which is a phototransistor type, was designed by the Toshiba brand and is considered one of the best quality products in the market.
Toshiba brand guarantees the protective function inside the chip and includes many functions in the product. Also, there are 8 MOSFET inputs and outputs in the Toshiba optocoupler, which are easily placed on the circuit board or PCB circuits with the pins. This means that you will not have a difficult path ahead of you for soldering and installing parts in the device.
The first advantage that is extremely useful for consumers in this product is related to the input and output buffer. The use of logical buffers in all outputs will make the installation and start-up of the product much easier. Of course, note that the product is a single-channel optocoupler, that is, there is only one LED and light-sensitive part in the part.
The LED used in the product is of the gallium type, which is very accurate, and the amount of light in the sensor is calculated with a central chip. Due to the high speed of the existing IC chip, the product has a good performance speed and does not cause much disturbance to your electronic device. Also, using TLP350 optocoupler, you can drive twelve MOSFETs with different capacities. Of course, to do this, you must pay attention to the capacity of the modules.
This Toshiba optocoupler has a voltage fluctuation of 2.5 amps in its outputs. Also, the internal peak current during work is about 2 milliamps. To start the product, you need a power supply with a voltage of 15 to 30 volts, which should not have a tolerance of more than 5 milliamps. Also, the standard working temperature of the optocoupler is set from minus 40 to plus 100 degrees, and the delay time for executing commands is about 500 nanoseconds in the worst case. The working frequency is also around 50 kHz so that the presence of the part in your device will not cause any delay.
To wholesale TLP350 with no chain of intermediaries, from the manufacturer company or trusty sources in China or all around the world, add this part and your other required electronic components to the inquiry basket and submit the inquiry list after you have added and confirmed all of your required parts. We will send you back an invoice with unbeatable prices as soon as possible.
TLP350 Optocoupler Attributes
Customer Reviews
Write Your Review
You May Also Like
Cooperation with China manufacturers has made YouGou Electronics one of the best Optocoupler suppliers in China. If you need to buy TLP350 Optocoupler from main manufacturers at the wholesale price, submit the form bellow.
Buying electronic components from online retailers does not meet your requirements! Such platforms are not a good place to find rare components. On the other hand, the real seller is several levels far from you and you have to deal with undependable intermediary suppliers. So the prices grow significantly and you do not gain valid warranty and after sale service. So how to buy electronic components from china at the best price, expected quality and valid warranty.
Most of the world's needed electronic components are manufactured in China. if you have a business in which electronic components are the main feed, it is vital to have your electronic component supplier in China. read more to learn more about points and challenges of finding and working with Chinese electronic components suppliers and sourcing agents.
China is a source of high-quality electronics at a reduced cost. The wholesale electronic components china consists of the purchasing and selling of Chinese electronics in large quantities at wholesale prices.
